![\"07](\"http:\/\/www.gaterslocksmith.com\/blog\/wp-content\/uploads\/2015\/07\/07-27-11-download-682.jpg\")
<\/a><\/p>\nThe challenge was securing the overhead door. In the past the only option for more security was to drill a hole through the roller track and insert a padlock through the hole blocking the door from lifting. Although this method is still effective, the padlock is often exposed to bolt cutters. I researched the locks available for overhead doors and discovered the Major \u201cGarageblok.\u201d The lock uses a hardened steel bolt, protective hardened sleeves and a protective padlock shield. The lock is made up of a, \u201ctough armored 2 \u00bc lb 3\/16 inch steel housing, plated in zinc chromate.\u201d The lock can be locked in the open or closed position. The Major \u201cGarageblok\u201d is handed for the right side or left side of the door. I locked both sides of the garage door for maximum security.<\/p>\n I reinforced the entry door with a wrap-a-round plate, steel strike box and Mul-T-Lock deadbolt. For convenience all three locks were opened with the same key.<\/p>\n \n","protected":false},"excerpt":{"rendered":" A few years ago a Home Owners Association (HOA) I work for purchased a $6,000.00 pressure washer for cleaning their own side-walks and driveways. The pressure washer with it’s own water tank fit on a trailer and could easily be … Continue reading <\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n